[Hackrf-dev] HackRF DX 100Km on 1296.1

[Scott Davis]

Did you try my NBFM TX?

I’ll let Dana send you the CW beacon.

Here’s a simple SSB TX at 144.3 MHz. You can set the RF freq as you wish.

73, Scott K5TA

 


On Sep 23, 2015, at 4:16 PM, R. Niles Vaught <nvaught at bellsouth.net> wrote:

> I would love to see your GRC flow graphs for TX.  I have successfully RX 220 , 440 and 2 M, but no TX yet.
> 
> Niles
> K4RNV
> 
> 
> 
> On Wednesday, September 23, 2015 5:43 PM, Tom <vsboost at hotmail.com> wrote:
> 
> 
> Well done, I have done a little on 2m in fm on a diamond x7000.
> On 24 Sep 2015 6:37 am, Dana Shtun <ve3dss at hotmail.com> wrote:
> Hi All
> 
> Last night fired up the HackRF again into my 43 element loop yagi @ 60 feet and was copied
> with a very good signal strength at a distance of 100 Km (60 Miles) on 1296.1 MHz using CW (morse code)
> and running the Hack as a propagation beacon (repeating message).
> Power output appears to be normal, but I am not sure how the 
> IF and RF power controls work exactly .
> 
> With the right software front end this little box would be a boon to the VHF UHF amateur radio
> community for receive and transmit on our VHF UHF and Microwave bands.
> 
> I wonder what it would take to interface it to something like PowerSDR ?  
> 
> Regards
> Dana VE3DS in Toronto
> 
> _______________________________________________
> HackRF-dev mailing list
> HackRF-dev at greatscottgadgets.com
> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
> 
> 
> _______________________________________________
> HackRF-dev mailing list
> HackRF-dev at greatscottgadgets.com
> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20150923/ada27630/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: K5TA-SSB-TX-001.grc
Type: application/octet-stream
Size: 23681 bytes
Desc: not available
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20150923/ada27630/attachment.obj>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20150923/ada27630/attachment-0001.html>