[Hackrf-dev] Gqrx can't find hackRF

[Jay Hamlin]

Brian-  Thank you!

Since I am on Macintosh, my step 1 command is:
   otool -l /usr/local/Cellar/gqrx/HEAD/Gqrx.app/Contents/MacOs/Gqrx | grep osmo

And I get the exact same path as you with offset 24 except I have version 0.1.5.

Step 2 fails - ok, so osmodr did not get created with libhackrf compiled in!  This is a start.

I am following the directions here: https://github.com/andresv/homebrew-gnuradio

The step for building osmodr I think is this one:
  brew install gr-osmosdr gr-baz —HEAD

Is that right?

Thanks,
Jay.

On Jan 10, 2015, at 2:24 PM, Brian Dickman <brian.dickman at gmail.com> wrote:

> A good first step is to make sure that your osmosdr is linked with libhackrf. Perhaps there is an easier way to do this? Here's my approach.
> 
> At a terminal prompt:
> 
> 1) otool -l `which gqrx` | grep osmo
> 
> (those are backticks up by the escape key, not single quotes)
> 
> You should get back the full path to your libosmosdr dylib. Take that filename and feed it into the next command (for example, mine says "name /usr/local/lib/libgnuradio-osmosdr.0.1.2git.dylib (offset 24)" so I'll use that path, but use the result you get):
> 
> 2) otool -l /usr/local/lib/libgnuradio-osmosdr.0.1.2git.dylib | grep hackrf
> 
> You should get a result back (for example, mine says "name /usr/local/lib/libhackrf.0.dylib (offset 24)"). If you don't, then osmosdr did not get created with libhackrf compiled in. You can also run without the grep to see all the info that otool knows about libhackrf.
> 
> --
> Brian
> 
> On Sat, Jan 10, 2015 at 10:16 AM, Jay Hamlin <redwoodranch at mac.com> wrote:
> I have tried hard to solve this problem on my own but I’m stuck and need help.  I installed all the software on Macintosh using Homebrew following the instructions carefully.  I used hackrf_spiflash and hackrf_cpldjtag to update the firmware and hackrf_info reports good information like everything is fine. But hackRF does not show up as a device in Gqrx and osmocom_fft reports no device found.  I saw one other report like this in the archives but with no resolution.  It seems like there must be a simple configuration or path wrong but I can’t figure it out.  Please help.  Thanks.  Jay.
> _______________________________________________
> HackRF-dev mailing list
> HackRF-dev at greatscottgadgets.com
> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20150110/b14794dc/attachment.html>