[Hackrf-dev] How to set Tx power

[Mitja kocjančič]

Hi when I want to set TX Power to 15dbm on 76 Mhz I just set RF Gain to
1000 (Probably no efect after 50 for RF Gain but it works) and IF Gain and
BB Gain to 10000

Thats how I do it but I would be great if I could calculate (from IF And RF
Gain) the power HackRF is putting out

2015-12-03 7:45 GMT+01:00 김상혁 <tkdgur7896 at gmail.com>:

> Hi, I’m using HackRF One and I want to use frequency 2150MHz
> However, when I set high frequency(my case : 2150MHz), the Rx can’t
> receive any data from the Tx
> I used sample rate 16MHz and my flow graph (GNURadio) like below:
> Tx)
> File source -> packet encoder -> GMSK mod -> osmocom sink
> Rx)
> Osmocom source -> GMSK demod -> packet decoder -> file sink
>
> I researched about Tx power and I found maximum Tx power as frequency
>
>    - 10 MHz to 2150 MHz: 5 dBm to 15 dBm, generally increasing as
>    frequency decreases
>    - 2150 MHz to 2750 MHz: 13 dBm to 15 dBm
>    - 2750 MHz to 4000 MHz: 0 dBm to 5 dBm, increasing as frequency
>    decreases
>    - 4000 MHz to 6000 MHz: -10 dBm to 0 dBm, generally increasing as
>    frequency decreases
>
> Also I tried to set Gain level at osmocom sink, but I don’t know how to
> set the Tx power to maximum
> Which parameter is effect on Tx power ?
> Thanks,
>
>
>
> _______________________________________________
> HackRF-dev mailing list
> HackRF-dev at greatscottgadgets.com
> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20151203/5403d420/attachment.html>