[Hackrf-dev] hackrf_usb.bin needed

[Michael Ossmann]

It has been pointed out to me that you may need hackrf_usb.dfu instead.
(attached)


On Wed, Jul 31, 2013 at 10:19:47PM -0600, Michael Ossmann wrote:

>

> hackrf_usb.bin attached

> 

> On Wed, Jul 31, 2013 at 08:02:18PM +1000, Graham Cottew wrote:

> >

> > After many hours and torn out hair I still am struggling with getting all the dependancies in place to allow 'make program' running here from the hackrf_usb directory.

> > 

> > I do however have dfu-util installed and it can see my bricked Jawbreaker in DFU mode on a USB port.

> > Can someone please mail me a current hackrf_usb.bin so that I may attempt to upload it to the Jawbreaker?

> > 

> > Any tricks for the uninitiated would be appreciated.

> > 

> > I am guessing that I can do this with a 

> > dfu-util -D hackrf_usb.bin 

> > 

> > Do I need to use any other options, or to specify the Altsetting of the DFU Interface using -a?

> >  




> _______________________________________________

> HackRF-dev mailing list

> HackRF-dev at greatscottgadgets.com

> http://nine.pairlist.net/mailman/listinfo/hackrf-dev


-------------- next part --------------
A non-text attachment was scrubbed...
Name: hackrf_usb.dfu
Type: application/octet-stream
Size: 17308 bytes
Desc: not available
Url : http://nine.pairlist.net/pipermail/hackrf-dev/attachments/20130731/8753bdc9/attachment-0001.obj