[Hackrf-dev] RX/TX switching

[Gavin Jacobs]

Matteo,
Using GnuRadioCompanion, there is a way to switch from RX to TX, but it is not obvious. If you use the Osmosdr Source and Sink blocks, and specify the hackrf as the device, then one works but not the other. However, if you use the Osmosdr Source and Sink blocks, and specify Soapy as the device, and hackrf as the soapy device, then you can have both source and sink in the same flowgraph. If you are a newcomer to GRC, it can be a long road to get it working. To get started, are you a beginner with GRC? What is your platform? Do you have the hackrf working in receive mode? Also, please tell us a bit about your application.

Jake

________________________________
From: HackRF-dev <hackrf-dev-bounces at greatscottgadgets.com> on behalf of Matteo Terzi <matteo.terzi97 at gmail.com>
Sent: April 10, 2018 3:34 AM
To: hackrf-dev at greatscottgadgets.com
Subject: [Hackrf-dev] RX/TX switching

Hi,
I'd like to know if there is a way to switch from RX mode to TX mode and vice versa with GRC Radio Companion.
Thanks

--
Matteo TERZI
Google Gmail Member
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20180411/b72f405e/attachment.html>