[Hackrf-dev] No way to get USB to talk to the board and flash the device

[colin glass]

Are there any other means of flashing the rom other than via the USB Fernando?Permissions problems come from what source Fernando?
I have circled like a bird of prey around the FAQ's each resulting in no connection.Many thanksColin

      From: Fernando <fernando at samara.com.es>
 To: colin glass <cgabcd1234 at yahoo.co.uk>; "hackrf-dev at greatscottgadgets.com" <hackrf-dev at greatscottgadgets.com> 
 Sent: Monday, 8 May 2017, 15:03
 Subject: Re: [Hackrf-dev] No way to get USB to talk to the board and flash the device
   
 a error of hackrf_info may be because permission problems.
 If the device does not show on syslog the problem will be worse.
 If your device is show as recognized in syslog, try this
 https://github.com/mossmann/hackrf/wiki/FAQ
 
 regards
 
 
 On 08/05/17 14:36, colin glass wrote:
  
  Thanks Fernando I tend to get this ...  hackrf_open() failed: HACKRF_ERROR_NOT_FOUND (-5)
 ubuntu at ubuntu:~/Downloads/hackrf-2017.02.1/firmware-bin$ hackrf_info
 No HackRF boards found. 
  but let me try your script Colin
 
        From: Fernando <fernando at samara.com.es>
 To: colin glass <cgabcd1234 at yahoo.co.uk>; "hackrf-dev at greatscottgadgets.com" <hackrf-dev at greatscottgadgets.com> 
 Sent: Monday, 8 May 2017, 0:20
 Subject: Re: [Hackrf-dev] No way to get USB to talk to the board and flash the device
  
   if you open a terminal and type
 
 sudo tail -f /var/log/syslog
 
 
 and then you plug in your hackrf
 
 you should get something like this
 
 
 May  3 00:34:08 FPGAwars kernel: [202113.781179] usb 3-1: new high-speed USB device number 11 using xhci_hcd
 May  3 00:34:08 FPGAwars kernel: [202114.102805] usb 3-1: New USB device found, idVendor=1d50, idProduct=6089
 May  3 00:34:08 FPGAwars kernel: [202114.102810] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=4
 May  3 00:34:08 FPGAwars kernel: [202114.102812] usb 3-1: Product: HackRF One
 May  3 00:34:08 FPGAwars kernel: [202114.102813] usb 3-1: Manufacturer: Great Scott Gadgets
 May  3 00:34:08 FPGAwars kernel: [202114.102815] usb 3-1: SerialNumber: 000000000000000071c469c825671743
 May  3 00:34:12 FPGAwars mtp-probe: checking bus 3, device 11: "/sys/devices/pci0000:00/0000:00:15.0/0000:03:00.0/usb3/3-1"
 May  3 00:34:12 FPGAwars mtp-probe: bus: 3, device: 11 was not an MTP device
 
 
 regards
 
 
 
 
 
 
 On 08/05/17 00:15, colin glass wrote:
   
  gnuradio bootable from a memory stick.... I have tried to access it via W10 and Zaddig too ... 
  
 
         From: Fernando <fernando at samara.com.es>
 To: hackrf-dev at greatscottgadgets.com 
 Sent: Sunday, 7 May 2017, 22:38
 Subject: Re: [Hackrf-dev] No way to get USB to talk to the board and flash the device
  
   What operating system are you using?
 
 
 On 07/05/17 22:49, colin glass via HackRF-dev wrote:
  
   So I have had my hackers for 3 months and it sat in a  box. I plugged it into my laptop and tried a variety of  ways to talk  to hit via USB including a powered USB.  
  However, I am worried I simply have a brick as I cannot flash  the device and therefore cannot access and use all its wonderful features! 
  Any help/thoughts/advice? 
  thanks so much 73's M0HYH Colin   
  
 _______________________________________________
HackRF-dev mailing list
HackRF-dev at greatscottgadgets.com
https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
 
 
    _______________________________________________
 HackRF-dev mailing list
 HackRF-dev at greatscottgadgets.com
 https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
  
 
      
  
    
 
      
 
  

   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20170508/ff737880/attachment.html>