[Hackrf-dev] No way to get USB to talk to the board and flash the device

[colin glass]

Thanks FernandoI tend to get this ... hackrf_open() failed: HACKRF_ERROR_NOT_FOUND (-5)
ubuntu at ubuntu:~/Downloads/hackrf-2017.02.1/firmware-bin$ hackrf_info
No HackRF boards found.
but let me try your scriptColin

      From: Fernando <fernando at samara.com.es>
 To: colin glass <cgabcd1234 at yahoo.co.uk>; "hackrf-dev at greatscottgadgets.com" <hackrf-dev at greatscottgadgets.com> 
 Sent: Monday, 8 May 2017, 0:20
 Subject: Re: [Hackrf-dev] No way to get USB to talk to the board and flash the device
   
 if you open a terminal and type
 
 sudo tail -f /var/log/syslog
 
 
 and then you plug in your hackrf
 
 you should get something like this
 
 
 May  3 00:34:08 FPGAwars kernel: [202113.781179] usb 3-1: new high-speed USB device number 11 using xhci_hcd
 May  3 00:34:08 FPGAwars kernel: [202114.102805] usb 3-1: New USB device found, idVendor=1d50, idProduct=6089
 May  3 00:34:08 FPGAwars kernel: [202114.102810] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=4
 May  3 00:34:08 FPGAwars kernel: [202114.102812] usb 3-1: Product: HackRF One
 May  3 00:34:08 FPGAwars kernel: [202114.102813] usb 3-1: Manufacturer: Great Scott Gadgets
 May  3 00:34:08 FPGAwars kernel: [202114.102815] usb 3-1: SerialNumber: 000000000000000071c469c825671743
 May  3 00:34:12 FPGAwars mtp-probe: checking bus 3, device 11: "/sys/devices/pci0000:00/0000:00:15.0/0000:03:00.0/usb3/3-1"
 May  3 00:34:12 FPGAwars mtp-probe: bus: 3, device: 11 was not an MTP device
 
 
 regards
 
 
 
 
 
 
 On 08/05/17 00:15, colin glass wrote:
  
  gnuradio bootable from a memory stick.... I have tried to access it via W10 and Zaddig too ... 
  
 
        From: Fernando <fernando at samara.com.es>
 To: hackrf-dev at greatscottgadgets.com 
 Sent: Sunday, 7 May 2017, 22:38
 Subject: Re: [Hackrf-dev] No way to get USB to talk to the board and flash the device
  
   What operating system are you using?
 
 
 On 07/05/17 22:49, colin glass via HackRF-dev wrote:
  
   So I have had my hackers for 3 months and it sat in a box. I plugged it into my laptop and tried a variety of ways to talk  to hit via USB including a powered USB.  
  However, I am worried I simply have a brick as I cannot flash the device and therefore cannot access and use all its wonderful features! 
  Any help/thoughts/advice? 
  thanks so much 73's M0HYH Colin   
  
 _______________________________________________
HackRF-dev mailing list
HackRF-dev at greatscottgadgets.com
https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
 
 
    _______________________________________________
 HackRF-dev mailing list
 HackRF-dev at greatscottgadgets.com
 https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
  
 
      
 
  

   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20170508/ca60f068/attachment.html>