[Hackrf-dev] Take 2 on firmware

colin glass cgabcd1234 at yahoo.co.uk
Fri Jul 7 07:25:31 EDT 2017


Will do that Dominic and revert.thanks for looking at this.colin

      From: Dominic Spill <dominicgs at gmail.com>
 To: colin glass <cgabcd1234 at yahoo.co.uk> 
Cc: HackRF-dev at greatscottgadgets.com
 Sent: Thursday, 6 July 2017, 4:48
 Subject: Re: [Hackrf-dev] Take 2 on firmware
   
On 5 Jul 2017 14:57, "colin glass" <cgabcd1234 at yahoo.co.uk> wrote:

Nothing in DFU mode
No output on lsusb no NXP ARM device ;-(

Could you paste the output of dmesg from when you connect the device in dfu mode?
Thanks,  Dominic

      From: Dominic Spill <dominicgs at gmail.com>
 To: colin glass <cgabcd1234 at yahoo.co.uk> 
Cc: "HackRF-dev at greatscottgadgets. com" <HackRF-dev at greatscottgadgets. com>
 Sent: Monday, 3 July 2017, 17:33
 Subject: Re: [Hackrf-dev] Take 2 on firmware
   
On 3 July 2017 at 08:53, colin glass via HackRF-dev <hackrf-dev at greatscottgadgets. com> wrote:
>
> I got my hands on a second hackrf hardware device 2 after I concluded the fist device was bricked.
> So the led's are better on this device BUT the USB led will not light and I cannot
> get the device to talk to windows or Linux (Ubuntu).
>
> Now what do I do if I cannot handshake the board and install firmware?
> What am I missing as I cannot find anything on the forums .... kind of run out of ideas.

Does the board show up when you connect in DFU mode?  Hold down the DFU button as you connect or reset the HackRF.  It will show up as an "NXP ARM device" in lsusb output from Linux.


   



   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20170707/ac528f8b/attachment.html>


More information about the HackRF-dev mailing list