[Hackrf-dev] FW: gnu radio on windows

Thu Nov 3 15:34:27 EDT 2016

hi,

No, windows 10, and it worked after your comnents

Thanks

Get Outlook for Android

On Thu, Nov 3, 2016 at 9:30 PM +0200, "Mitja kocjančič" <veso266 at gmail.com> wrote:

Are you using vm? As you cant use HackRF in virtual Machine
 via Newton Mail On Thu, Nov 03, 2016 at 7:44am, Ephraim Ben-Ishai <ephraim4321 at gmail.com> wrote:

Hi again,

When running from command line (windows):

C:\Users\ephraim>hackrf_info

Found HackRF board 0:

hackrf_open() failed: HACKRF_ERROR_LIBUSB (-1000)

I get this.

Also, I can’t run the command: osmocom_fft

Thanks,

From: Mitja kocjančič [mailto:veso266 at gmail.com] 
Sent: Wednesday, November 2, 2016 9:50 PM
To: Ephraim Ben-Ishai <ephraim4321 at gmail.com>
Cc: hackrf-dev at greatscottgadgets.com
Subject: RE: [Hackrf-dev] FW: gnu radio on windows

Hi try this: https://github.com/kit-cel/simulink-hackrf/blob/master/README.md

But I havent been able to compile this on windows so I cant assist you here unfortunately

Is GNU Radio working now?

via Newton Mail 

On Wed, Nov 02, 2016 at 8:44pm, Ephraim Ben-Ishai <ephraim4321 at gmail.com> wrote:

Hi, 

Ok, its better now, I guess. 

Can you assist in the following: setting up HackRF One for Matlab?

Thank you so much.

Ephraim

From: Mitja kocjančič [mailto:veso266 at gmail.com] 
Sent: Wednesday, November 2, 2016 9:41 PM
To: Ephraim Ben-Ishai <ephraim4321 at gmail.com>
Cc: hackrf-dev at greatscottgadgets.com
Subject: RE: [Hackrf-dev] FW: gnu radio on windows

No USB light should stay on all the time maybe try plugging your HackRF into difrent USB Port

via Newton Mail 

On Tue, Nov 01, 2016 at 11:35pm, Ephraim Ben-Ishai <ephraim4321 at gmail.com> wrote:

Hi again,

I spoke a bit too soon, after exiting gnu radio, the green usb light goes off, going back to gnu radio, it will not work, unless I unplug, and plug the usb cable, is this the correct behavior?

Thanks,

Ephraim

From: Mitja kocjančič [mailto:veso266 at gmail.com] 
Sent: Monday, October 31, 2016 3:15 PM
To: Ephraim Ben-Ishai <ephraim4321 at gmail.com>
Cc: hackrf-dev at greatscottgadgets.com
Subject: Re: [Hackrf-dev] FW: gnu radio on windows

Try to set device arguments on osmocom source to hackrf=0

via Newton Mail 

On Sun, Oct 30, 2016 at 1:32pm, Mitja kocjančič <veso266 at gmail.com> wrote:

Hi wich version of gnuradio did u use? Was it this one: https://github.com/pothosware/PothosSDR/wiki/GNURadio

via Newton Mail 

On Sun, Oct 30, 2016 at 1:16am, Ephraim Ben-Ishai <ephraim4321 at gmail.com> wrote:

Hi again,

I recorded the session of gnu radio, from opening, compiling and running:

“setting gnuradio environment

** (python.exe:9024): WARNING **: Trying to register gtype 'GMountMountFlags' as enum when in fact it is of type 'GFlags'

** (python.exe:9024): WARNING **: Trying to register gtype 'GDriveStartFlags' as enum when in fact it is of type 'GFlags'

** (python.exe:9024): WARNING **: Trying to register gtype 'GSocketMsgFlags' as enum when in fact it is of type 'GFlags'

C:\Program Files\GNURadio-3.7\lib\site-packages\gnuradio\grc\main.py:43: GtkWarning: Could not find the icon 'gnuradio-grc'. The 'hicolor' theme

was not found either, perhaps you need to install it.

You can get a copy from:

        http://icon-theme.freedesktop.org/releases

  gtk.window_set_default_icon(gtk.IconTheme().load_icon('gnuradio-grc', 256, 0))

<<< Welcome to GNU Radio Companion 3.7.10.1 >>>

Block paths:

        C:\Program Files\GNURadio-3.7\share\gnuradio\grc\blocks

Loading: "C:\Users\ephraim\Desktop\hackRF One Tutorial\Lesson1.grc"

Win32; Microsoft Visual C++ version 14.0; Boost_106000; UHD_003.009.003-0-unknown

>>> Done

Generating: 'C:\\Users\\ephraim\\Desktop\\hackRF One Tutorial\\top_block.py'

Generating: 'C:\\Users\\ephraim\\Desktop\\hackRF One Tutorial\\top_block.py'

Executing: C:\Program Files\GNURadio-3.7\gr-python27\python.exe -u C:\Users\ephraim\Desktop\hackRF One Tutorial\top_block.py

Win32; Microsoft Visual C++ version 14.0; Boost_106000; UHD_003.009.003-0-unknown

gr-osmosdr 164a09fc (0.1.5git) gnuradio 3.7.10.1

built-in source types: file osmosdr fcd rtl rtl_tcp uhd hackrf bladerf airspy redpitaya

FATAL: Failed to open HackRF device (-5) HACKRF_ERROR_NOT_FOUND

Trying to fill up 1 missing channel(s) with null source(s).

This is being done to prevent the application from crashing

due to gnuradio bug #528.

gr::pagesize: no info; setting pagesize = 4096 “

please help or direct me to a solution

Ephraim

From: Ephraim Ben-Ishai [mailto:ephraim4321 at gmail.com] 
Sent: Sunday, October 30, 2016 1:49 AM
To: hackrf-dev at greatscottgadgets.com
Subject: gnu radio on windows 

Hi,

Following tutorial : https://greatscottgadgets.com/sdr/1/ using HackRF One.

Installed gnuradio for windows, however after compiling the FFT screen is void of signal?

Can you help?

Thanks,

Ephraim

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20161103/d330f95b/attachment.html>