[Hackrf-dev] off frequency

[Michael Ossmann]

On Mon, Oct 20, 2014 at 09:05:03AM -0600, rgk wrote:
>
> How about create an executable that I can use that will apply the
> hackrf_one_usb_rom_to_ram.bin to the hackRF One? That is simple and
> just about anyone can follow a few steps. Having to compile code,
> install several things and then learn what they are before I can apply
> a firmware upgrade to a hardware device is really pushing the limits.

Nowhere in these instructions does it say that you must compile any
code:

https://github.com/mossmann/hackrf/wiki/Updating-Firmware

As I mentioned in my previous email, Windows cannot support the complete
procedure.  That is something we hope to improve in the future, but, for
now, there is no point in trying.  Instead I recommend that you use
Pentoo as described here:

https://github.com/mossmann/hackrf/wiki/Getting-Started-with-HackRF-and-GNU-Radio#try-your-hackrf-with-pentoo-linux

If you boot to Pentoo, you can complete the firmware and CPLD update
without compiling anything.  You just have to run two commands.

Mike