[Hackrf-dev] Any Pentoo install lessons learned?
Jay Bougie
jaybougie at gmail.com
Wed Aug 20 21:04:25 EDT 2014
I wanted to follow-up that working with Zero on the #pentoo freenode
channel I was able to get through a successful install. It did require
updates to the pentoo installer, and a late night (or two) of testing with
Zero
Steps for a successful install:
boot live cd (amd64 hardened, RC3 in my case)
emerge -1 pentoo-installer (this updates the pentoo installer to latest in
the SVN repo
run pentoo-installer (either from command line, or after startx)
Anyone considering doing a install of pentoo from RC3 is HIGHLY suggested
to take the prior step. (emerge -1 pentoo-installer)
Thanks again Zero!
Best,
Jay
On Sun, Aug 17, 2014 at 9:02 PM, Jay Bougie <jaybougie at gmail.com> wrote:
> md5sum of the download looked good. (md5sum matched digest) Original issue
> continues, off chat on freenode...
>
> When ISO burned, here is the contents, fwtw:
>
> Directory of D:\
> 08/07/2014 07:40 AM 19,214,336 gentoo.efimg
> 08/07/2014 07:39 AM 2,220,343,296 image.squashfs (md5 of this file
> is 8DE60E0F193F0912E2BBF8CD2BAD79E1 )
> 02/24/2014 12:04 AM 87 syslinux.cfg
> 08/07/2014 06:35 AM 0 livecd
> 08/07/2014 06:35 AM 7,236 README.txt
> 5 File(s)
> Directory of D:\modules<DIR> ..
> 08/05/2014 01:45 AM 4,751,360 pentoo_overlay-20140805.lzm
> 08/05/2014 01:43 AM 69,005,312 portage-20140805.lzm
> 08/05/2014 01:48 AM 231,337,984 zdistfiles-20140805.lzm
> 3 File(s) 305,094,656 bytes
> Directory of D:\isolinux<DIR> ..
> 08/07/2014 06:35 AM 950 F2.msg
> 08/07/2014 06:35 AM 1,468 F3.msg
> 08/07/2014 06:35 AM 1,352 F4.msg
> 08/07/2014 06:35 AM 1,401 F5.msg
> 08/07/2014 06:35 AM 879 F6.msg
> 08/07/2014 06:35 AM 1,461 F7.msg
> 08/07/2014 06:35 AM 3,772,043 System-pentoo.map
> 08/07/2014 07:40 AM 2,048 boot.cat
> 04/30/2013 10:11 PM 198 boot.msg
> 08/07/2014 06:35 AM 209,537 elilo.efi
> 02/15/2014 01:11 AM 348,888 hdt.c32
> 04/30/2013 10:11 PM 24,576 isolinux.bin
> 03/08/2014 04:17 PM 1,624 isolinux.cfg
> 08/07/2014 06:35 AM 57 kernels.msg
> 04/30/2013 10:11 PM 164,504 memtest86
> 02/15/2014 01:11 AM 869,715 pci.ids
> 08/07/2014 06:35 AM 5,007,280 pentoo
> 08/07/2014 06:35 AM 9,969,388 pentoo.igz
> 10/20/2012 09:37 PM 346,450 pentoosplash.png
> 02/15/2014 01:11 AM 800 reboot.c32
> 02/15/2014 01:11 AM 154,128 vesamenu.c32
> 21 File(s) 20,878,747 bytes
>
>
>
>
>
>
> On Sun, Aug 17, 2014 at 2:27 PM, Jay Bougie <jaybougie at gmail.com> wrote:
>
>> Thanks, will verify the download checksum. Was assuming good live CD run
>> an indication it was in good health. Will report back on checksum.
>>
>> Am using amd64 hardened.
>> On Aug 17, 2014 2:21 PM, "Rick "Zero_Chaos" Farina" <zerochaos at gentoo.org>
>> wrote:
>>
>>> -----BEGIN PGP SIGNED MESSAGE-----
>>> Hash: SHA1
>>>
>>> On 08/17/2014 12:29 PM, Jay Bougie wrote:
>>> > Mostly a Pentoo question follows, but figure some in HackRF-dev might
>>> have
>>> > some very current experience here.
>>> >
>>> >
>>> https://github.com/mossmann/hackrf/wiki/Getting-Started-with-HackRF-and-GNU-Radio
>>> > points out latest Pentoo .iso (2014.0-RC3). All seems well in the
>>> livecd,
>>> > and the pentoo-installer prog on the desktop seems to go OK. When
>>> booting
>>> > the post-installed OS seems to be in a near crippled state. Can login,
>>> but
>>> > ability to startX or connect network lacking. (libXau.so.6 missing &
>>> eth0
>>> > interface not found)
>>>
>>> There are 4 current 2014.0_RC3 isos, which one are you using? I've not
>>> had this issue reported but if you aren't using the amd64-hardened then
>>> there are much fewer testers as this one is the most popular. If you
>>> are using something terrible (like x86) then it's entirely possible you
>>> are the only one with a computer to old to support 64 bit and no one
>>> else has tested it.
>>>
>>> Also, the DIGESTS file is included for a reason, please verify your
>>> md5sum to ensure your download wasn't corrupted.
>>>
>>> Thanks,
>>> Zero
>>>
>>> >
>>> > Any pointers to getting this installed? (Undocumented steps? Should I
>>> use
>>> > RC2.1 & pentoo-update ? )
>>> >
>>> > See this has some additional steps with running pentoo-installer, but
>>> > unclear if this applies to RC3
>>> > https://code.google.com/p/pentoo/wiki/PentooInstaller
>>> >
>>> >
>>> >
>>> > _______________________________________________
>>> > HackRF-dev mailing list
>>> > HackRF-dev at greatscottgadgets.com
>>> > http://nine.pairlist.net/mailman/listinfo/hackrf-dev
>>> >
>>>
>>> -----BEGIN PGP SIGNATURE-----
>>> Version: GnuPG v2
>>> Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/
>>>
>>> iQIcBAEBAgAGBQJT8POyAAoJEKXdFCfdEflKTboP/3mnFkZwNzNBEM9RAYoK7Pqi
>>> pJRxxk6kNrwFpyCGBgvdgpPDz1gHqmOds5ldzd+802SfZqRV1JemWNmFhEuLhKY0
>>> GN/GOccSDync5XmjJg7Q5fKjR2IeftIHi1wmP+4d2x3fCmieLk2BBEUS9qpQ4l9Y
>>> e8wKSqyMg0mPX0PK34Az7PqlH6UOeiY3eq0Hg6dwqsw3guc3pnJNMWkHheA4jIE3
>>> KCOzeZd46m4ao4hwGj4T4iaapFes1hqJfjPUl+q47bdm1Va2UNz2RV2+wIPMz4lt
>>> Lakt1hyaS7bjNrSvbOGizU1bFuLbT7Fvo7oZdWsTSFcCiILdw03SuvGF+HfGhyno
>>> t5jjqkA6Ih5Jsw5guEb0k9E0nJunBSRz77f/Bf/ca5EM0d2CRsekgqYPlbkR2IrG
>>> NzUHKbMEyGRoSTYDn5mR9zS/YkaOZf4pqwRKqsIyr4vHsnIW/uKsQwfW75c3AwRs
>>> z259CDdHipCFEH8IZarORy6kDGDy6XSFFn4QjxOOd7SMcMJoJtHm8k9MPJ9lt8G8
>>> lTgjFqOHunkaoM6XisBSCHiAf4//BqVc9JFASFkml3g773It+ZA8vm96Nf96qgYs
>>> st0p5H5cEWEf/5IjWdSXQrtwxgfsbYxcOARWBX6t0b9us5U+cyVJOeV5NIuVPCAF
>>> 60MKnUdhjVZVQskndtAh
>>> =GLdo
>>> -----END PGP SIGNATURE-----
>>> _______________________________________________
>>> HackRF-dev mailing list
>>> HackRF-dev at greatscottgadgets.com
>>> http://nine.pairlist.net/mailman/listinfo/hackrf-dev
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://nine.pairlist.net/pipermail/hackrf-dev/attachments/20140820/958982d3/attachment.html>
More information about the HackRF-dev
mailing list